by Peter |
Last Updated: October 8, 2022 Buy the best gps receiver for raspberry pi for your needs. Choose from the best gps receiver for raspberry pi on the market. Pick the one that satisfies your need.
In Hurry? Checkout Our Top Pick Of Best Gps Receiver For Raspberry Pi.
Our Top Pick
9.7/10 our score
Best Gps Receiver For Raspberry Pi
| Rank | Product Name | Score |
|---|---|---|
|
1
|
VK-162 G-Mouse - Remote Mount USB - External GPS Navigation Dongle - Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux
|
9. 7
|
|
2
|
Waterproof GPS Receiver for Laptop, USB Interface, Raspberry Pi, 27 db Gain
|
9. 5
|
|
3
|
USB GPS Receiver Antenna Gmouse for Laptop PC Car Marine Navigation/Stratux/Raspberry Pi
|
9. 1
|
|
4
|
VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory
|
8. 8
|
|
5
|
Geekstory VK-172 Gmouse USB GPS Glonass Dongle Module Support an-dorid Linux Windows 10/8/7/vista/XP/Raspberry Pi
|
8. 6
|
|
6
|
Onyehn VK-162 G-Mouse USB GPS Dongle Navigation Module/GPS USB Engine Board External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux
|
8. 2
|
|
7
|
Geekstory GT-U7 GPS Module GPS Receiver Navigation Satellite Positioning NEO-6M with 6M 51 Microcontroller STM32 R3 + IPEX Active GPS Antenna High Sensitivity for Arduino Drone Raspberry Pi Flight
|
8. 0
|
|
8
|
Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS
|
7 .7
|
|
9
|
Geekstory BN-808 G-Mouse USB GPS Dongle Navigation Module M8030-KT Chip External GPS Antenna with 4M Flash USB GPS Receiver for Raspberry Pi Linux Windows 7 8 10
|
7. 4
|
1. VK-162 G-Mouse - Remote Mount USB - External GPS Navigation Dongle - Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux
1
9.7/10 our score
Features
- MULTI-PLATFORM: Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux
- STRATUX READY: plug and play and supported by Stratux project.
- LONG CORD: 7 ft. cord for remote mounting with magnetic base.
- UPDATED CHIP: u-blox 7 chipset, WAAS capable.
- DURABLE: IPX6 waterproof / dust-tight.
2. Waterproof GPS Receiver for Laptop, USB Interface, Raspberry Pi, 27 db Gain
2
9.5/10 our score
Features
- UBLOX 8 ENGINE: Uses u-Blox protocol specification to configure device over serial interface. Combines low power consumption and high sensitivity. Exceptional jamming immunity. 56 channels for fast acquisition and reacquisition.
- MULTI BAND RECEIVER: Receives GPS, GLONASS, QZSS and SBAS. Factory set for GPS and can be changed to GLONSASS using software. Support NMEA0183, 2.3 (compatible to 3.0). Built-in WAAS, EGNOS, MSAS
- COMPATIBLE: Windows 10, Win 8, Win 7, Raspberry Pi, 32bit or 64bit. For Linux, please check application notes on compatibility. Free GNSS software available.
- WATERPROOF: No need to cancel your road trip if it is raining since this heavy duty waterproof navigator can be used rain or shine. IPX6 Water Resistant. Cable Length 6.5 feet (2 Meters)
- SOFTWARE: Easily connects to you device via USB 2.0 and works with most commercial or open source mapping software including Google Earth, Windows Maps and Open CPN (Windows or MAC OS)
3. USB GPS Receiver Antenna Gmouse for Laptop PC Car Marine Navigation/Stratux/Raspberry Pi
3
9.1/10 our score
Features
- Working process: Menu-> Receiver->Port or SensorAPI to get data from GPS Receiver after instialled U-CENTER V8.2X GNSS software (Software can be downloaded from CD-ROM and Official website)
- Compatible: Win 11/10/ Win 8/ Win 7/Vista/XP/98/CE. Free GNSS Evaluation Software. 56-Channel All-IN-VIEW Tracking
- U-BLOX 7 Chipset inside, USB Port, Magnetic base, High sensitivity and Strong Singal,Protocol: NMEA 0183/ Japan QZSS/ India Gagan/ WAAS/ EGNOS/ MSAS Support. High Tracking Sensitivity
- Cable Length 6.5 Ft / 2 Meters , IPX4 Water Resistance / Dust-tight.
- Support OpenCPN on Raspberry Pi, Realtime Google Earth Pro and maps. 1 Year Warranty
4. VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory
4
8.8/10 our score
Features
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
5. Geekstory VK-172 Gmouse USB GPS Glonass Dongle Module Support an-dorid Linux Windows 10/8/7/vista/XP/Raspberry Pi
5
8.6/10 our score
Features
- VK 172 USB GPS works with Windows, Android, Linux, Raspberry PI and Google Earth, not for IOS system
- VK-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver. (Drivers and links to documentation you can find on the details page of the user manual.)
- The default output is the product GPS protocol data. You can test the software or serial commands to modify switch GPS/GLONASS protocol data
- VK-172 automatically adapt the baud rate. The baud rate has any data output
- The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
6. Onyehn VK-162 G-Mouse USB GPS Dongle Navigation Module/GPS USB Engine Board External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux
6
8.2/10 our score
Features
- VK-162 GPS support for windows and for linux system, not for android and IOS system
- The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- For amateur radio operators who need accurate timing for digital communications, this is a unit that will help synchronize the timing for those modes.
- This device is extremely accurate. It usually takes a couple of seconds to acquire the initial fix, followed up shortly by acquiring additional satellites for a more precise fix.
7. Geekstory GT-U7 GPS Module GPS Receiver Navigation Satellite Positioning NEO-6M with 6M 51 Microcontroller STM32 R3 + IPEX Active GPS Antenna High Sensitivity for Arduino Drone Raspberry Pi Flight
7
8/10 our score
Features
- GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning
- GT-U7 GPS Module with a USB interface, you can directly use the phone data cable on the computer point of view positioning effect. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, IPX interface active antenna included in the package!
- Operating voltage: 3.6V-5V (or direct usb power supply), Operating baud rate: 9600 (can be modified). Application: Vehicle-mounted, Handheld devices such as PDAs, Vehicle monitoring, Mobile phones, camcorders and other mobile positioning systems
- If you have any questions about using our products, such as needing technical documentation for a product please feel free to contact us (please click on "Geekstory" you can find "Sold by Geekstory" under the Buy Now button, click on "Ask a question" in the new page to send us an email.) We will try our best to help you out
8. Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS
8
7.7/10 our score
Features
- G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Android, Raspberry pi, Linux and Google Earth, not for IOS system.
- The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
- You need to install driver before use it on window, but plug and play for raspberry pi and Linux. If you need some driver links and using videos for G72 gps usb, Please contact us.
- 1 X USB GPS Receiver Module, the product dimensions: 60X24X9mm. Update frequency: 1~10Hz, Baud rate: 4800, 9600, 19200, 38400, 57600, 115200bps
- The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
9. Geekstory BN-808 G-Mouse USB GPS Dongle Navigation Module M8030-KT Chip External GPS Antenna with 4M Flash USB GPS Receiver for Raspberry Pi Linux Windows 7 8 10
9
7.4/10 our score
Features
- BN-808 USB GPS Module support windows and linux system, not for android and IOS system.
- BN-808 USB GPS receiver uses the latest eighth generation chip (M8030-KT). The Receiving Format: GPS, GLONASS, BDS, GALILEO, SBAS and QZSS. default GPS+GLONASS+SBAS+QZSS combined positioning. If you need high accuracy, it is recommended to use GPS+GLONASS+SBAS+QZSS+GALILEO or GPS+BDS+SBAS+QZSS+GALILEO combined positioning mode, and have 72 Searching Channel, Frequency: GPS L1，GLONASS L1，BeiDou B1，SBAS L1，Galileo E1
- You need to install the driver to use BN-808 USB GPS Module on Windows system, but it is plug and play on Linux system
- This usb GPS receiver has a cable length of 2 meters, Bottom with magnet adsorption, BN-808 USB GPS Module has 4M flash to save the configuration. So you don't need to reset the data when you use it next time
- The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- Drive link: https(:)//tinyurl.com/gps-module-manual