by Peter |
Last Updated: August 20, 2020 Are you looking for the Top 10 best plasma cutter under 500? Well, just grab a cup of coffee and read on! We are huge fans of best plasma cutter under 500 and have done our comprehensive research here.
In Hurry? Checkout Our Top Pick Of Best Plasma Cutter Under 500.
Our Top Pick
9.7/10 our score
Best Plasma Cutter Under 500
| Rank | Product Name | Score |
|---|---|---|
|
1
|
Lotos LTP5000D Plasma Cutter
|
9. 7
|
|
2
|
LOTOS LT5000D Plasma Cutter
|
9. 5
|
|
3
|
PrimeWeld 3-in-1 50 Amp Plasma Cutter
|
9. 1
|
|
4
|
Plasma Cutter 50 Amp 110V/220V
|
8. 8
|
|
5
|
PRIMEWELD 50A CUT50DP Plasma Cutter
|
8. 6
|
|
6
|
Forney Easy Weld 251 20 P Plasma Cutter
|
8. 2
|
|
7
|
Lotos LTP5500D Non-Touch Pilot Arc Plasma Cutter
|
8. 0
|
|
8
|
Plasma Cutter Pilot Arc CUT50 Dual Voltage 110V 220V 50A Cutting Non Touch Machine Portable Plasma Cutter (CUT50L)
|
7 .7
|
|
9
|
Amico CHF-50, 50 Amp Pilot Arc Non-touch Plasma Cutter, 4/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine
|
7. 4
|
|
10
|
Amico 40 Amp Non-touch Pilot Arc Air Plasma Cutter, 110V/220V Dual Voltage Cutting Machine, 1/2 in. Clean Cut, APC-40HF
|
7. 2
|
1. Lotos LTP5000D Plasma Cutter
1
9.7/10 our score
Features
- NON-TOUCH PILOT ARC PLASMA CUTTER
- SAFE AND AT LOW COST
- THE COMPATIBLE CONSUMABLES SETS
- OUTPUT & PERFORMANCE
- SETUP WITHIN 1 MIN
- PAPST ADVANCED COOLING SYSTEM
2. LOTOS LT5000D Plasma Cutter
2
9.5/10 our score
Features
- SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc
- Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum
- The pre-installed NPT 1/4 inch industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor
- Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)
3. PrimeWeld 3-in-1 50 Amp Plasma Cutter
3
9.1/10 our score
Features
- MULTIPURPOSE WELDER AND CUTTER
- VERSATILE 3-IN-1 WELDING/CUTTING MACHINE
- UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE
- PORTABLE, RELIABLE UNIT
- GREAT CUSTOMER SERVICE
4. Plasma Cutter 50 Amp 110V/220V
4
8.8/10 our score
Features
- Plasma Cut50 is a automatic DC 110/220V Cutter 60% at 50A, 100% at 40A Duty Cycle Air Plasma Cutter 50A
- On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2 inch(12mm)
- Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome can cut with non touch
- Conversion line easy transfer from 110V to 220V Home Use, Air Pressure 60-70PSI
5. PRIMEWELD 50A CUT50DP Plasma Cutter
5
8.6/10 our score
Features
- Great for cutting stainless steel, copper, carbon steel and aluminum
- HF non-touch arc-starting cutting Pilot-arc machine
- Cutting Thickness: 1/2 inch Clean Cut and 3/4 inch Severance Cut
- 50 Amps under 220V Frequency 50 and 60 Hz with operating air pressure as 75 PSI@ 5 CFM
6. Forney Easy Weld 251 20 P Plasma Cutter
6
8.2/10 our score
Features
- CUTS - Mild steel, aluminum and stainless steel from thin material to 1/4 inch (6.35 millimeters) with ease!
- EASY TO USE - All you need is 120 volt power source and 1.5 CFM of compressed air
- DRAG TORCH TECHNOLOGY - Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
- LIGHT AND PORTABLE - Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
- RUGGED - All metal case, Built to take the day to day
7. Lotos LTP5500D Non-Touch Pilot Arc Plasma Cutter
7
8/10 our score
Features
- The Non-HF Start pilot arc torch with a Euro-type Central connector offering improved consumable life with a patented BACK STRIKING design
- 2T/4T Function enabled
- Latest IGBT Inverter Technology
- The pre-installed NPT 1/4 inch industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor
8. Plasma Cutter Pilot Arc CUT50 Dual Voltage 110V 220V 50A Cutting Non Touch Machine Portable Plasma Cutter (CUT50L)
8
7.7/10 our score
Features
- 1. Non-touch Pilot Arc: it efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag；the technology allows you to cut without touching the tip to the metal. It provides a better cutting quality and longer consumable life
- 2. Input and Output: Dual voltage capability allows the machine to run directly on 110V/220V. plug adapters included, 10-50 A output, 1/2” ideal clean cut and 3/4” maximum severance, Non-HF Blowback Start, there is no HF interference
- 3. Wide Applications: Suitable for cutting stainless steel, alloy steel, mild steel, copper, carbon steel and aluminum, and other metals. Can be widely used at demanding industrial and construction work, or home and hobby us
- 4. Setup Easily: The air regulator and water trap is a combined unit mounted at the back machine,the whole machine can be setup very quickly, and it is to reduce the chance of water entering the plasma torch
9. Amico CHF-50, 50 Amp Pilot Arc Non-touch Plasma Cutter, 4/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine
9
7.4/10 our score
Features
- Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
- Can cut up to 4/5 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
- 115-Volt and 230-Volt dual voltage, 50Hz/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
- Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.
- Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.
10. Amico 40 Amp Non-touch Pilot Arc Air Plasma Cutter, 110V/220V Dual Voltage Cutting Machine, 1/2 in. Clean Cut, APC-40HF
10
7.2/10 our score
Features
- Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
- Can cut up to 1/2 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
- 115-Volt & 230-Volt dual voltage, 50/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
- Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.
- Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, and fan dormancy.